Preparation before using the fiber laser cutting machine
- Check whether the power supply voltage is consistent with the rated voltage of the machine before use china fiber laser cutting machine, so as to avoid unnecessary damage.
- Check whether there is foreign matter residue on the machine table, so as not to affect the normal cutting operation.
- Check whether the cooling water pressure and water temperature of the chiller are normal.
- Check whether the cutting auxiliary gas pressure is normal.
How to use the fiber laser cutting machine
- Fix the material to be cut on the work surface of the china fiber laser cutting machine.
- According to the material and thickness of the metal sheet, adjust the equipment parameters accordingly.
- Select the appropriate lenses and nozzles, and check them before starting the machine to check their integrity and cleanliness.
- Adjust the cutting head to the appropriate focus position according to the cutting thickness and cutting requirements.
- Select the appropriate cutting gas and check whether the gas ejection state is good.
- Try to cut the material. After the material is cut, check the verticality, roughness of the cut surface and whether there is burr or slag.
- Analyze the cutting surface and adjust the cutting parameters accordingly until the cutting process of the sample meets the standard.
- Perform the programming of the workpiece drawings and the layout of the whole board cutting, and import the cutting software system.
- Adjust the cutting head and focus distance, prepare auxiliary gas, and start cutting.
- Check the process of the sample, adjust the parameters in time if there is any problem, until the cutting meets the process requirements.
Precautions for laser cutting machine
- Do not adjust the position of the cutting head or cutting material when the equipment is cutting to avoid laser burns.
- During the cutting process, the operator needs to observe the cutting process at all times. If there is an emergency, please press the emergency stop button immediately.
- A fire extinguisher should be placed near the equipment to prevent the occurrence of open fire when the equipment is cut.
- The operator needs to know the switch of the equipment, and can close the switch in time in case of emergency.