W12 Series is a 4-roller rolling machine. The up roller is main drive roller, through the output gear of the reducer connected with the upper gear to provide torque when rolling. The down roller make a vertical movement, the force is collected through the hydraulic oil force with the piston in the hydraulic tank to tight the plate and hydraulic transmission. There are side roller in the two sides of the down rollers that make inclined movement along the make guide, it is hydraulic drive. The machine has large advantage is the pre-bending and the rolling can be achieved in one machine.
Specification
| Max. rolling thickness when full loaded | Common Mild Steel | ≤25MM | |
| Max. pre-bending thickness when full loaded | Common Mild Steel | ≤20MM | |
| Max. rolling width(Cylinder Length) | 2050MM | ||
| Min. roll diameter when max.
specification |
700MM | ||
| yield limit S245 | 245 MPA | ||
| Upper roller diameter | 350MM | ||
| lower roller diameter | 320MM | ||
| lower roller speed | 80MM/MIN | ||
| Side roller diameter | 280MM | ||
| Side roller speed | 80MM/MIN | ||
| Working roller | Material | 42CRMO | |
| Hardness | HB240-286 | ||
| Hydraulic system pressure | 20MPA | ||
| Rolling speed | 4.5M/MIN | ||
| Main motor power | 18.5 KW | ||
| Cone accessory | NO standard | ||
Main Features
- The 4-roller rolling machine is computer-controlled four roller bending rolls machine with the pre-bending function. After the plate loaded, no need to change into another side edge for the pre-bending and rolling.
- The machine four rollers has been produced by forge, hardening and tempering treatment. HB220-260 with good mechanical properties, high rigidity, high in anti-abrasion, good for high-load working and long working lifetime.
- Our working roller side gear use ball gear, small in friction and reduce the active power lose and save the energy.
- The bottom roller and side rollers movement are controlled by computer.
- Automatic-leveling, digital display screen, the synchronization accuracy ±0.2MM, high in rolling precision and easy in operation.
- The machine down roller, side roller can do one-side inclining, and can make synchronization movement in an inclined position for a better cone rolling working.
Machine details
Plate Rolling Machine
