Products Recommended- Hydraulic Metal Shearing Machine QC12Y Series

The hydraulic swing metal shearing machine is a metal board material plate shearing machine for hydraulic and mechanical systematic control. The shearing machines of most models deploy standard control functions, including an operator control system and cut frequency to show several systems. It is systematic that the back gauge shows several(numerical control can programming) control and hand control edge gap adjustment systems.

Two hydraulic oil cylinders offer the needed shearing force; in the entire course of cutting control from the hydraulic valve group, the two hydraulic oil cylinders synchronously work, shearing forces of export balance.

The hydraulic system of an oil cylinder uses a regular hydraulic flow pump, a pump that offers to get the liquid that presses the control shearing sequence, and the dirty hydraulic big jar that presses material installation into control and controls the hydraulic oil cylinder that cuts. In the cutting cycle, first, press material installation hydraulic big jar press the workpiece that had been cut; systematic induction goes to the pressure that presses material installation, according to order make cut cycle, arrive to cut circulating minimum point, pass through the system of the return trip, an accumulator and the two return trips of the return trip of the big jar. Press material installation will accompany loosening the workpiece that presses, allowing the operating worker to remove the workpiece that had been cut immediately.

Characteristic and the primary use

Adjust by hand to cut point gaps, have instruction brand instruction, and are promptly portable.

Seting former support material and back gauge attachment, former support material to adopt staff gauge count, the location of link stopper rear gear material adopts mechanical silk rod transmission; it is trimming that expert move, the counter shows the value( the systematic installation of numerical control can direct programming control, need not trimming).

Set the former and side to protect the fence, protect after photo electricity, and open the door to break electrical protection, etc., to ensure a safe protective structure and guarantee safety in operation.

The structure of the metal shearing machine

Frame

From the welding of steel plate, the frame shape structure has good rigidity. Two oil cylinders were fixed about the pillar. On the surface of the work table, set the movement blade holder to the lower blade and make trace regulations; still have it on the surface of the work table to send the material ball; operation is portable.

Upper tool post

Have good rigidity for the welding structure of the steel plate; it has a partial cover controlling the drive of the oil cylinder and the big nitrogen jar of a return trip for a fulcrum, low-down reciprocate to swing is completed to cut. The blade vertically supporting the surface of the upper tool post processes a curve to guarantee the course of cutting in the upper and lower blades of the gap between the consistency.

Press material installation

From installation, the former frame on the backing plate presses the material composition of a group oil cylinder, presses material oil cylinder after oil, presses material head, surmounting the spring of pulling force, after pulling force press, compress tightly board material. After cutting is completed, have the aid of the pulling force of the spring of the pulling force reset. The size of the pressure-plate-force follow had been cut, and the increase of board thickness increased.

Former support and back gauge

Former support: Set up on the surface of the worktable, reach the needed gear material value with the instruction value of the staff gauge and the regulation campaign link stopper. When cutting a thin steel plate before use, the former gear material is cut, which is facilitated relatively.

The back gauge is packed on the upper tool post, with the upper tool post making the bottom move. The regulation of the back gauge goes through gear deceleration from 0.55kw motor drives rear from the transmission of the threaded shaft. Pressing the regulation button ” + “( or ” -“), reach gear material board, forward(or backward) regulation; flexible regulation can not get needed regulation value, can circle start work to move regulation wheel carry out by hand is trimming so as ensure to need regulation value. Therefore, the regulation of rear gear material is portable and flexible.

The adjusting range of rear gear material for10 ~ 600mm when cutting board material length after being more significant than when gear material is away from, can open gear material board to the final location, and passes through the bearing, on support bevel lift baffle, artificial lineation out cuts, cuts the board material of arbitrary length.

Things to note when using hydraulic shears:

1. Do not shear overlapping sheets, do not trim the edges of rough sheets, or shear narrow sheets and short sheets that cannot be pressed tightly.
2. The gap between the blades should be adjusted according to the thickness of the sheet, but it should not be greater than 1/30 of the sheet. The blades should be firmly fastened, and the upper and lower blade surfaces should be parallel. After adjustment, they should be manually inspected to avoid accidents.
3. The blade edge should be kept sharp. The blade should be replaced in time if it becomes blunt or cracked.
4. When shearing, the pressing device should firmly press the sheet, and shearing is not allowed when it is not pressed tightly.
5. For equipment with hydraulic devices, other hydraulic valves, except the throttle valve, are not allowed to be adjusted privately.