RFQ Of CNC Bending Machines

What problems will be encountered on the CNC bending machines in daily life, let’s talk about the CNC bending machine:

Question 1: What is the specific reason for the large and small angles during CNC bendings?

There are several specific reasons for the large and small angles during CNC bending. It may be that the plate is not flat or the plate thickness has changed. It is also possible that the shaft in the equipment is caused by deviation.

Question 2: What are the common failures of mechanical bending machines?

Mechanical bending machine, its common failure problems, mainly include:

Fault problem 1: The guide gap between the slider and the guide rail is too large.

Fault problem two: the transmission failure of the rear gear.

Fault problem 3: The deviation of parallelism between the linear guide rail of the back gauge beam and the center line of the mold is too large.

Fault problem 4: The connection between the oil cylinder and the slider is loose.

Question 3: What is the first thing to consider when purchasing a CNC bending machines?

When purchasing a CNC bending machine, the first thing to consider is the production of parts. It must be able to complete the processing tasks, and its worktable must be short and the tonnage can be small.

Question 4: What is the control of the CNC bending machines?

CNC bending machine, which controls the back gauge and slider stroke of the bending machine.

Question 5: How to master the operation of the CNC bending machines step by step?

To master the operation of the CNC bending machines, we can start with the ordinary bending machines, and then proceed to the programming and operation of the CNC bending machine.