The Introduction Of Press Brake Machine WC67Y Series

0 Comments

The whole structure of Press Brake WC67Y Series

■ Totally European design, streamlined looking, Monoblock, Welded steel frame rigid to deflection moment and high tensile with ST44 A1 material.

PRESS BRAKE WC67Y Series are Equipped with the Estun user-friendly interface, the E21 provides all main press brake functionality.

■ Automatic tonnage and stroke adjustment for bending angles. Perfect bending results with easy angle input and operation of machine.

1.Hydraulic system

■ Adopt integrated hydraulic control system, more reliable and easy for maintenance. Hydraulic system is from Rexroth, Germany.

■ All pipes, flange and joint with vibrations proof and leakage proof design and setting .

■ All seals in cylinder is DZ from Taiwan, the most famous brand,good quality and high performance.

■ Overload overflow protection is outfitted to hydraulic system,which can assure no leakage,and the oil level can be read or seen directly.

■ The hydraulic system is made in compliance with current regulations.

2.Electrical system

■ Electrical Cabinet under the standard of IP55, Electrical under international CE Standard, safe and reliable, strong anti interference capability.

■ Protective fence and the safety interlock to ensure the operation safety. Have a movable single-hand pedal switch,easy to operate.

■ Front Side Covers with safety switches, Back light safety guards,Foot pedal conforming to CE regulation.

3.Synchro control system

■Patented hydro-mechanical system for exact parallelism and a high repeat accuracy

■ The worktable adopts the particular design, reducing the crowning distortion amount of lower tool effectively.

■Adopt steel torsion bar synchro system, simple in structure and high in accuracy, ensures the parallelism between beams is used for the synchronism.

4.Mould and dies

5.Backgauge

■Back gauge fingers with two gauging steps used one for short and the other for long bending depths.

■ Back Gauge positioning fingers move along linear bearings with ±0.05 mm. positioning tolerance

6.E21 NC Controller

  • Backgauge and block control
  • Control for AC motors,frequency inverter
  • Intelligent positioning
  • Stock counter
  • Holding/decompression time setting
  • Program memory of up to 40 programs,up to 25 steps per program
  • One side positioning
  • Retract function
  • One key backup/restore of parameters
  • mm/inch
  • Chinese/English

7.Press brake equipment

8.Safety system and tooling

Categories: